Article details

A few tips to make speakers better

2017-04-22handler910

Many fancier when playing Hi-FI have setup problem, the key is the horn in the room placement will affect the tone of the balance, low quality, sound field width, if deep clarity and knot like force. Want to get the sound, such as can grasp the following tips in place correctly, will enable you to set the sound system has the feeling of life.

Increase the amount of sense and sense of form

Make the speaker closer to the back wall and side wall. Compared with the single wall, the corner can regenerate two times the low-frequency. If you do not need toe-in horn toe-in, or only a little toe-in, positioning will be more accurate, low frequency is relatively mellow and soft.

To strengthen the low frequency of law and sense of movement

Keep the speaker off the wall. Increase the horn toe-in angle, if the result of the sound field is too narrow, the distance between the two speakers can be opened a little. If the sound field is too heavy, there is a low frequency echo, and no matter how to move the speaker can not be improved, it is possible that the emperor position is not good, please replace the location of the listening.

Let the sound field wider

Pull the distance between the two trumpets. If you can not pull apart, you can change the angle of the toe-in smaller.

Reduce the sound field, strengthen the sense of positioning

In contrast to the previous one, narrow the distance between the speakers and increase the toe-in angle. Reduce the adverse effects of space on the sound (such as the reflection of the wall is too strong) when the reflection tone is too long, the sound will be more sharp, and even echo. The distance of the horn is opened, and the wall is closer to the side wall. By the side wall to regenerate the low-frequency background, increase the toe-in angle, listen to more direct sound, rather than a reflection of sound.

Reduce the adverse effects of hard flooring

The surface of the floor between the speaker and the listening position is too hard, the sound is loud and harsh, and it is difficult to distinguish the subtle differences in tone. If you can not improve the floor material, as well as the speaker and the emperor in the middle of a thick carpet pad. Increase the low frequency control force, so that the dynamic voice between the retractable bi-wiring, or even bi-amping. Whether it is bi-wiring or bi-amping, should use the same horn line sound input all, also want to use the same amplifier.

Under the horn to the nail (spikes) or rubber pad (rubber feet)?

Rubber pad for hard floor tile or wood, for example. Flexible elastic rubber pad, can isolate the connection between the horn and the hard floor, the speaker vibration can not be transmitted to the ground, the ground resonance will not affect the speaker. Foot nails are suitable for soft ground, such as carpet. If there is a four foot nail, be sure to adjust the foot nail length, the horn of the weight is evenly dispersed in a four foot nail, and the locking nut.

epilogue

The actual effect of the speaker placement is very large, only their own step by step to debug, because each listening environment is not the same. Speaker placement can make a huge difference, so find the best position for everyone is the key.


About us

Greatwall Group administrates GUANGZHOU PRECISE SOUND ELECTRONIC MANUFACTORY and GUANGZHOU ZHUNKUAI HARDWARE MANUFACTORY.It designs, manufactures and sells pro-audio products and hardware products. Our products include professional loudspeakers, line array, power amplifiers, mixers, signal processor, amplifier cases, mixer cases, etc.

MORE

Contact us

  • Guangzhou polyacoustic acoustics Trade Co., Ltd.
  • 4408-771-883
  • jusound@greatwallaudio.com
  • Guangzhou City, Panyu District District Shanxi road quasi